1. ELECTRIC HEATING AND COOLING

• Heat Pump with a SEER of 14 or greater a/c condenser, or
  Electric Resistance Heating with a SEER of 14 or greater a/c condenser.
• Ductwork fully insulated with branch duct R-6 and plenum R-4. If metal ducts are used, install 2" of foil-backed or vinyl-backed insulation.

2. WATER HEATING

• Use an energy efficient electric water heater.

3. INSULATION

• Ceiling -- minimum R-30
• Exterior wall cavity --- minimum R-13
• Floors (other than slab) -- minimum R-13
• Seal sole plate, windows, doors and any other openings into conditioned space

4. WINDOWS

• Double pane
  OR
• Single pane with storm window

5. EXTERIOR DOORS (with weather-stripping)
  Note: Any combination of the following door types may be used:

• Metal insulated
• Solid core wood
• Fiberglass insulated
• Double-pane glass door

6. VENTILATION

• Adequate attic ventilation using ridge vent, wind or power turbine or gable vent, and soffit vent
• Kitchen and laundry equipment

7. MISCELLANEOUS

• All-electric, although gas ranges are acceptable
• All space conditioning and water heating requirements provided by Cleco